The active fixed calliper brakes from the KTR-STOP® M-D series are hydraulically actuated and are used as service and holding brakes. They brake safely and reliably even under rough ambient conditions.

Structure and function

Two housing legs are connected via a housing bridge in a bend-proof manner at a defined distance. The short distance between the brake pad and the brake disk ensures short reaction times. The brake pads are available in the materials "organic" and "sinter".

Because it only has a few moving parts, the KTR-STOP® M-D only requires minimal maintenance. The brake pads are easy to replace in an installed state. To do so, the screws on the sides are unscrewed, the pad holders removed, and the pads are pulled out to the sides.

Optionally, a version with air gap regulation is possible which keeps the distance between brake pads and the brake disk constant.

Power range

Clamping forceUp to 203 kN
Braking torque56,500 Nm (brake disk Ø 800 mm)
113,300 Nm (brake disk Ø 1,500 mm)
153,900 Nm (brake disk Ø 2,000 mm)
Temperature range-20 °C to +50 °C
Contact form